The core of the STKa53-AA starter kit is the TQMa53-AA module with the Freescale i.MX537 CPU. The starter kit enables you to start development immediately while evaluating the TQ module at the same time. Because all the processor signals are available from the module you will have access to all the features and interfaces available on the i.MX537.
The STKa53-AA starter kit consists of a baseboard and a TQMa53-AA module plugged into the baseboard. The TQMa53-AA is based on an i.MX537 running at 800 MHz, 2 GB eMMC Flash, 512 MB DDR3, 64 KB EEPROM, a temperature range of -25°C to +85°C, and the following interfaces:
2x FlexCAN
2x Ethernet 10/100BaseT
ESAI, SATA
up to 5x UART
3x USB 2.0 Host
1x USB OTG
VGA, 24-bit UXGA and dual LVDS UXGA.